• Home
  • About
  • Contact
  • SCALE STEEL NEWS
SCALE STEEL.
  • Home
  • About
  • Contact
  • SCALE STEEL NEWS

5086 Aluminium Alloy- SCALE STEEL.

1/19/2023

 
​5086 aluminum alloy is mainly used in ships, automobiles and aircraft plate weldable parts, etc.
Chinese name 5086 aluminum alloy[SCALE STEEL] standard: GB/T 4437.1-2000 Aluminum Al: residual silicon Si: ≤0.40 copper Cu: ≤0.10
 
Overview of 5086 Aluminium Alloy
Aluminum-magnesium alloy and aluminum-manganese alloy are collectively referred to as anti-rust aluminum, because the alloy [SCALE STEEL]composition between them can increase their anti-corrosion properties. The representative of aluminum-manganese alloy is 3003,3004,3105. According to the magnesium alloy content, the order is 5005, 5252, 5251, 5050, 5052, 5754, 5083, 5056, 5086 and so on. 5086 aluminum plate typical use: for the need to have high corrosion resistance, good weldability and medium strength occasions, such as the need for strict fire pressure vessels, refrigeration devices, TV towers, installation of exploration equipment, transportation equipment, missile parts, armor, etc.
5086 aluminum plate supply status: O, H112,[SCALE STEEL] H116, H111, H321, H32, H36, H38
 
Chemical Composition for 5086 Aluminium Alloy
Silicon :0.00 to 0.40
Iron Fe: 0.000 ~ 0.500
Copper Cu:0.00 to 0.10
Magnesium Mg: 3.5 ~ 4.5
Zinc-zn: ≤0.25
Manganese Mn: 0.20 ~ 0.7
Ti: ≤0.15
Chromium Cr: 0.05 ~ 0.25[SCALE STEEL]
Note: Single :≤0.05; Total :≤0.15
 
Mechanical Property of 5086 Aluminium Alloy
Tensile strength σb (MPa) : ≥240
Conditional yield strength σ0.2 (MPa) : ≥95
Elongation δ10 (%) : ≥10
Elongation δ5 (%) : ≥12
Note: longitudinal mechanical properties of pipe at room temperature
Sample size: all wall thickness[SCALE STEEL]
State: Aluminum and aluminum alloy hot extrusion seamless round tube (H112 state)
 

5083 High Magnesium Aluminum Alloy Sheet- SCALE STEEL.

1/19/2023

 
5083 Aluminum Plate is a kind of high magnesium alloy.[SCALE STEEL] It has good strength, corrosion resistance and machinability among non-heat treatment alloys.
 
5083 Aluminum Plate’s Features:
 
① The surface of 5083 aluminum plate is beautiful [SCALE STEEL]after anodizing treatment. Good arc welding performance. The main alloying element in 5083 alloy is magnesium, which has good corrosion resistance and weldable properties, as well as moderate strength. Excellent corrosion resistance makes 5083 alloy widely used in Marine applications such as ships, as well as automobile, aircraft welding parts, subway light rail, strict fire pressure vessels (such as liquid tank cars, refrigerated trucks, refrigerated containers), [SCALE STEEL]refrigeration units, TV towers, drilling equipment, transportation equipment, missile parts, armor, etc.
②5083 belongs to Al-Mg alloy, which is widely used, especially in the construction industry, it is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and moderate strength. The main alloy element of 5083[SCALE STEEL] is magnesium, which has good formability, corrosion resistance, weldability and medium strength. It is used in the manufacture of aircraft fuel tanks, oil pipes, traffic vehicles, ships, sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical shell and so on. (3) AL-Mg alloy, is the most widely used kind of antirust aluminum, this alloy has high strength, especially fatigue strength: high plasticity and corrosion resistance, can not be strengthened by heat treatment, in the semi-cold hardening plasticity is good, cold hardening plasticity is low, good corrosion resistance, good weldability, bad machinability, polishing. The utility is mainly used for requiring high plasticity and good weldability, low load[SCALE STEEL] parts working in liquid or gas medium, such as oil tank, gasoline or lubricating oil conduit, various liquid containers and other small load parts made with deep drawing: wire used to do rivets.
 
Chemical Composition for 5083 Aluminum Plate:
Aluminum Al: allowance
Silicon Si: ≤0.40
Copper Cu: ≤0.10
Magnesium Mg: 4.0 ~ 4.9
Zinc-zn: ≤0.25
Manganese Mn: 0.40 ~ 1.0
Ti: ≤0.15
Chromium Cr: 0.05 ~ 0.25
Iron Fe: 0.000 ~ 0.400[SCALE STEEL]
Note: Single :≤0.05; Total :≤0.15
Density: 2.71g/cm3
 
Mechanical Properties for 5083 High Magnesium Aluminum Alloy:
Conditional yield strength σ0.2 (MPa) : ≥110
Elongation δ10 (%) : ≥20
Elongation δ5 (%) : ≥12[SCALE STEEL]
Note: longitudinal mechanical properties of pipe at room temperature

    nEWS

    FROM SCALE STEEL
    INFO@FRESTEEL.COM

    ARCHIVES

    March 2023
    February 2023
    January 2023
    December 2022
    November 2022
    September 2022
    July 2022
    May 2022
    March 2022
    February 2022
    January 2022
    December 2021
    November 2021
    October 2021
    September 2021
    August 2021
    July 2021
    June 2021
    April 2021
    March 2021
    February 2021
    January 2021
    December 2020
    November 2020

    Categories

    All

    RSS Feed

HENAN SCALE IMPORT& EXPORT CO.,LTD
INFO@FRESTEEL.COM T:+8637186107816 F:+8637163797816

Copyright © 2018

  • Home
  • About
  • Contact
  • SCALE STEEL NEWS