Introduction of Normalizing, Quenching, Tempering and Annealing Heat Treatment Process for Metals- SCALE STEEL.
Metal heat treatment is one of the important processes in mechanical manufacturing. Compared with other processing processes, heat treatment generally does not change the shape of the workpiece and the overall chemical[SCALE STEEL] composition, but by changing the internal microstructure of the workpiece, or changing the chemical composition of the workpiece surface, giving or improving the performance of the workpiece. It is characterized by improving the intrinsic quality of the workpiece, which is generally not visible to the naked eye. As some people say, machining is surgery, heat treatment is internal medicine, representing the core competitiveness of a country's manufacturing industry.
Heat treatment process generally includes heating, insulation, cooling three processes, sometimes only heating and cooling two processes. These processes are interconnected and uninterruptible.
When the metal is heated, the workpiece is exposed to the air, and often occurs oxidation and decarbonization (that is, the carbon content on the surface of the steel parts is reduced), which has a very adverse effect on the surface performance of the parts after heat treatment. Therefore, the metal should usually be heated in a controlled or protective atmosphere, molten salt and vacuum, and can also be used for protective heating [SCALE STEEL]by coating or packaging methods.
The heating temperature is one of the important process parameters of heat treatment technology. The selection and control of heating temperature is the main problem to ensure the quality of heat treatment. The heating temperature varies with the metal material being treated and the purpose of the heat treatment, but is generally heated above the phase transition temperature to obtain high temperature microstructure. In addition, the transformation needs a certain amount of time, so when the surface of the metal workpiece to meet the requirements of the heating temperature, also must be maintained at this temperature for a certain time, so that the internal and external temperature is consistent, so that the microstructure transformation is complete, this period of time is called insulation time.
When high energy density heating and surface heat treatment are used, the heating speed is very fast, and generally there is no holding time, while the[SCALE STEEL] holding time of chemical heat treatment is often longer.
Metal heat treatment process can be divided into integral heat treatment, surface heat treatment and chemical heat treatment. According to the heating medium, heating temperature and cooling methods, each category can be divided into several different heat treatment processes. The same metal with different heat treatment process, can obtain different structure, thus has different properties. Steel is the most widely used metal in industry, and the microstructure of steel is also the most complex, so there are many[SCALE STEEL] kinds of steel heat treatment processes.
Integral heat treatment is a metal heat treatment process in which the workpiece is heated as a whole and then cooled at an appropriate rate to obtain the required metallographic structure to change its overall mechanical properties. The overall heat treatment of steel has annealing, normalizing, quenching and tempering four[SCALE STEEL] basic processes, that is, the "four fire" of heat treatment.
The quenching of steel is to heat the steel to the critical temperature Ac3 (hypoeutectoid steel) or Ac1 (hypereutectoid steel) above the temperature, heat preservation for a period of time, so that all or part of the austenitizing, and then with more than the critical cooling speed to Ms below fast cold (or Ms near isothermal) martensitic (or bainite) transformation of heat treatment process.
Process: heating, insulation, cooling.
The essence of quenching: the transformation of supercooled austenite to martensite or bainite to obtain martensite or bainite structure.
The purpose of quenching: (1) greatly improve the rigidity, hardness, wear resistance, fatigue strength and toughness of steel, so as to meet the different requirements of various mechanical parts and tools; (2) Meet the ferromagnetic, corrosion resistance and other special physical and chemical properties of some special steels by[SCALE STEEL] quenching.
Application: Quenching process is the most widely used, such as tools, measuring tools, molds, bearings, springs and automobiles, tractors, diesel engines, cutting machine tools, pneumatic tools, drilling machinery, agricultural machinery, petroleum machinery, chemical machinery, textile machinery, aircraft and other parts are using quenching process.
The medium used for workpiece quenching cooling is called quenching cooling medium (or quenching medium). The ideal quenching medium should have the condition that the workpiece can be quenched into martensite without causing too much quenching stress.
The commonly used quenching media are water, water solution, mineral oil, molten salt, molten alkali, etc.
Water is a quenching medium with strong cooling capacity.
Advantages: wide source, low price, stable composition is not easy to deteriorate.
Disadvantages: unstable cooling ability, easy to make the workpiece deformation or cracking. In the "nose" area of C curve (about 500 ~ 600℃), the water is in the steam film stage, cooling is not fast enough, will form a "soft spot"; And in the martensitic transition temperature zone (300 ~ 100℃), water is in the boiling stage, cooling too fast, easy to make the martensitic transition speed is too fast and produce great internal stress, resulting in workpiece deformation and even cracking. When the water temperature rises, [SCALE STEEL]the water contains more gas or the water is mixed with insoluble impurities (such as oil, soap, mud, etc.), will significantly reduce its cooling capacity.
Application: It is suitable for quenching and cooling of carbon steel workpiece with small section size and simple shape.
● Salt Water and Lye Water
Add the appropriate amount of salt and alkali in the water, so that high temperature workpiece immersed in the cooling medium, in the steam film stage precipitation of salt and alkali crystals and immediately burst, the steam film is[SCALE STEEL] destroyed, the workpiece surface of the oxide skin is also broken, so as to improve the cooling capacity of the medium in the high temperature zone, its disadvantage is the corrosion of the medium.
Application: Under normal circumstances, the concentration of salt water is 10%, caustic soda solution concentration is 10% ~ 15%. Can be used as the quenching medium of carbon steel and low alloy structural steel workpiece, the use temperature should not exceed 60℃, after quenching should be cleaned in time and rust prevention treatment.
The cooling medium is usually mineral oil (mineral oil). Such as oil, transformer oil and diesel oil. Oil generally uses No. 10, No. 20, No. 30 oil, the larger the oil, the greater the viscosity, the higher the flash point, the lower the cooling capacity, [SCALE STEEL]the use of temperature increases accordingly.
● Single liquid quenching
It is a quenching operation method in which austenitic chemical components are immersed in a quenching medium and cooled to room temperature. The single liquid quenching medium includes water, salt water, alkali water, oil and specially prepared quenching agent.
Advantages: Simple operation, conducive to mechanization and automation.
Disadvantages: The cooling rate is limited by the cooling characteristics of the medium and affects the quenching quality.
Application: Single liquid quenching for carbon steel is only suitable for simple shape of the workpiece.
● Double Liquid Quenching
Is the austenitic chemical parts first immersed in a kind of cooling ability of the medium, in the steel parts have not reached the quenching [SCALE STEEL]medium temperature is removed, immediately immersed in another kind of cooling ability of the medium, such as first water after oil, first water after air, etc. Double liquid quenching reduces deformation and cracking tendency, it is difficult to master the operation, and has certain limitations in application.
● Martensite grading quenching
Is the austenitic chemical parts first immersed in the temperature slightly higher or slightly lower than the steel martensitic point of the liquid medium (salt bath or alkali bath), maintain the appropriate time, until the steel parts inside and outside reach the medium temperature after the air cooling, in order to obtain the quenching [SCALE STEEL]process of martensitic structure, also known as fractional quenching.
Advantages: Fractional quenching can effectively reduce the phase change stress and thermal stress, and reduce the tendency of quenching deformation and cracking because of the air cooling after the fractional temperature stays to the same temperature inside and outside the workpiece.
Application: It is suitable for alloy steel and high [SCALE STEEL]alloy steel workpiece with high deformation requirement. It can also be used for carbon steel workpiece with small section size and complex shape.
● Bainite Isothermal Quenching
It is the quenching process of austenitizing steel parts, making it fast cold to the bainite transition temperature range (260 ~ 400℃) and isothermal maintenance, so that austenite into bainite, sometimes also called isothermal quenching, the general holding time is 30 ~ 60min.
● Compound hardening
The workpiece was quenched below Ms to obtain 10%-20% martensite, and then isothermal in the lower bainite temperature zone. With this cooling method, M+B structure can be obtained in workpiece with large cross-section. The martensite formed during pre-quenching can promote bainite transformation, and temper martensite[SCALE STEEL] at isotherm. Composite quenching for alloy tool steel workpiece can avoid the first type of tempering brittleness and reduce the residual Austenitic volume, namely the deformation and cracking tendency.
Tempering is a heat treatment process in which the quenched workpiece is reheated to an appropriate temperature below the lower critical temperature and then cooled to room temperature in air, water, oil and other media after holding it for a period of time.
The purpose of tempering is: (1) to eliminate the residual stress generated during quenching and prevent deformation and cracking; (2) Adjust the hardness, strength, plasticity and toughness of the workpiece to meet the performance requirements; (3) Stable structure and size to ensure accuracy; (4) Improve and enhance the processing performance.
● Low Temperature Tempering
Refers to the workpiece at 150~250℃ tempering.
Objective: To maintain high hardness and wear [SCALE STEEL]resistance of quenched workpiece and reduce quenching residual stress and brittleness.
Tempered martensite is obtained after tempering, which refers to the microstructure obtained by tempering quenched martensite at low temperature.
Application: cutting tools, measuring tools, die, rolling bearing, carburizing and surface hardening parts, etc.
● Moderate heat
Refers to the workpiece between 350 ~ 500℃ tempering.
Objective: To obtain high elasticity and yield point, appropriate toughness. Tempered tretinite refers to a complex structure of extremely[SCALE STEEL] fine spherical carbide (or cementite) distributed in the ferrite matrix formed during the tempering of martensite.
Application: spring, forging die, impact tool, etc.
● Tempering at high temperature
It refers to the tempering of the workpiece at more than 500℃.
Objective: To obtain comprehensive mechanical properties with good strength, plasticity and toughness.
Tempered soetensite refers to the complex phase structure of ferrite matrix formed during martensite tempering with fine spherical carbides (including cementite) distributed in the matrix.
Application: Widely used in a variety of[SCALE STEEL] important mechanical structural parts, such as connecting rod, bolt, gear and shaft parts.
Normalizing is a metal heat treatment process in which steel parts are heated to 30-50℃ above the critical temperature (the temperature of complete austenitization) and taken out of the furnace in the air or cooled by water spray, spray or blow after holding for an appropriate time.
Objective: (1) To refine grain size and homogenize [SCALE STEEL]carbide distribution; (2) Remove the internal stress of the material; (3) Increase the hardness of the material.
Material: Subeutectic Tinplate
Structure: Graphite Brown, Martensite Light Yellow, Pearlite Green and Dark Yellow, Cementite Brown
Tissue: Brown ferrite yellow, blue, white pearlite brown
Tissue: light brown pearlite grayish brown, ferrite red, yellow, blue
Material: 45# Steel
Structure: light blue ferrite, pearlite variety of colors
Advantages: (1) normalizing cooling rate is slightly faster than annealing cooling rate, so the obtained pearlite laminate spacing is smaller, normalizing structure is finer than annealing structure, so its hardness and strength is higher; (2)[SCALE STEEL] The cooling outside the normal furnace does not occupy the equipment, and the productivity is higher.
Application: Only applicable to carbon steel and low and medium alloy steel, but not applicable to high alloy steel. Because the austenite of high alloy steel is very stable, cooling in air will also result in martensitic structure.
(1) For low carbon steel and low alloy steel, normalizing can increase its hardness to improve the machinability;
(2) For medium carbon steel, normalizing can replace tempering treatment, prepare the microstructure for high-frequency quenching, and reduce the deformation of steel parts and reduce the processing cost;
(3) For high carbon steel, normalizing can eliminate the mesh cementite structure and facilitate spheroidizing annealing;
(4) For large steel forgings or steel castings with sharp changes in section, normalizing can be used instead of quenching, in order to reduce the deformation and cracking tendency, or prepare the organization for quenching;
(5) For the quenching repair parts of steel, the [SCALE STEEL]influence of overheating can be eliminated by normalizing, so as to be re-quenched;
(6) Used for cast iron to increase the pearlescent volume of matrix and improve the strength and wear resistance of castings.
Annealing is the process by which a metal or alloy is heated to a suitable temperature, held for a certain period of time, and then cooled slowly (usually with the furnace).
Purpose of Annealing:
(1) reduce the hardness of steel, improve plasticity, easy machining and cold deformation processing;
(2) To uniform the chemical composition and microstructure of steel, refine the grain, improve the performance of steel or prepare the microstructure for quenching;
(3) Eliminate internal stress and work hardening to [SCALE STEEL]prevent deformation and cracking.
1. Complete Annealing
Objective: To refine grain, homogenize microstructure, eliminate internal stress, reduce hardness and improve machinability of steel. The microstructure of fully annealed hypoeutectoid steel is F+P.
Application: Full annealing is mainly used for hypoeutectoid steel (wc=0.3~0.6%), generally medium carbon steel and low and medium carbon alloy steel castings, forgings and hot rolled profiles, and sometimes for their welding parts.
2. Incomplete Annealing
Process: The steel is heated to Ac1~Ac3(hypoeutectoid steel) or Ac1~Accm(hypoeutectoid steel) after insulation slowly cooling to obtain the heat [SCALE STEEL]treatment process close to the equilibrium structure.
Application: Mainly used in eutectoid steel to obtain spherical pearlite structure, in order to eliminate internal stress, reduce hardness, improve machinability.
3, isothermal Annealing
Process: Heat treatment process in which steel is heated to a temperature higher than Ac3(or Ac1), and cooled to a certain temperature in the pearlite region quickly after holding for an appropriate time, and isothermal maintenance, so that austenite is transformed into pearlite, and then air cooled to room temperature.
Objective: Same as full annealing, the transition is easier to control.
Application: It is suitable for stable steel: high carbon steel (wc> 0.6%), alloy tool steel, high alloy steel (total alloying element > 10%). Isothermal annealing is also beneficial to obtain uniform microstructure and properties. But it is not suitable for large section steel and large quantities of charge, because it is not easy to make the workpiece internal or batch workpiece isothermal temperature.
4. Spheroidizing Annealing
Process: A heat treatment process to spheroidize carbide in steel and obtain granular pearlite. Heating to Ac1 above 20~30℃ temperature, holding[SCALE STEEL] time should not be too long, generally 2~4h is appropriate, cooling method is usually used furnace cooling, or Ar1 below 20℃ isothermal for a long time.
Objective: To reduce hardness, uniform microstructure and improve machinability to prepare microstructure for quenching.
Application: Mainly used in eutectoid steel and eutectoid steel, such as carbon tool steel, alloy tool steel, bearing steel, etc. Spheroidization annealing to obtain spherical pearlite, in the spherical pearlite, cementite is spherical fine particles, dispersed on the ferritic matrix. Spherical pearlite compared with sheet pearlite, not only low hardness, easy to cut, and in quenching heating, austenite grain is not easy to coarse, cooling deformation and cracking tendency is small.
5. Diffusion Annealing (homogenizing annealing)
Process: Heat treatment process in which steel ingot, castings or forging billets are heated to a temperature slightly below the solid-phase line to hold them for a long time and then cooled slowly to eliminate chemical composition inhomogeneity.
Objective: To eliminate dendrite segregation and regional segregation during solidification of ingot and homogenize composition and structure.
Application: Used in some high quality alloy steel and alloy steel castings and ingot with severe segregation. The heating temperature of diffusion [SCALE STEEL]annealing is very high, usually 100~200℃ above Ac3 or Accm. The specific temperature depends on the degree of segregation and steel type, and the holding time is generally 10~15 hours. After diffusion annealing, complete annealing and normalizing treatment are needed to refine the structure.
6, Stress Removal Annealing
Process: the steel parts are heated to a temperature lower than Ac1 (generally 500~650℃), insulation, and then cooled with the furnace.
The stress removal annealing temperature is lower than A1, so no microstructure change is caused by stress removal annealing.
Objective: To eliminate residual internal stress.
Application: Mainly used to eliminate the residual stress of castings, forgings, welding parts, hot rolled parts, cold drawn parts, etc. If these stresses are not eliminated, they will cause deformation or cracks in the steel parts after a certain time, or in the subsequent cutting process.
7. Recrystallization Annealing
Recrystallization annealing, also known as intermediate annealing, is a heat treatment process to heat the metal after cold deformation to the recrystallization temperature above the appropriate time, so that the deformed grains are transformed into uniform equiaxed grains and eliminate work hardening and residual stress.
The recrystallization phenomenon must first have a certain amount of cold plastic deformation, and then must be heated to a certain [SCALE STEEL]temperature. The lowest temperature at which recrystallization occurs is called the lowest recrystallization temperature. The minimum recrystallization temperature of general metal materials is: T =0.4T.
The heating temperature of recrystallization annealing should be 100~200℃ higher than the minimum recrystallization temperature (the minimum recrystallization temperature of steel is about 450℃), and the temperature should be cooled slowly after appropriate insulation.
Nickel-Based alloy with other elements is called nickel alloy. Nickel has good mechanical, physical and chemical properties. Adding appropriate elements can improve its oxidation resistance, corrosion resistance, high temperature strength and some physical properties. Nickel alloy can be used as electronic tube material, precision alloy[SCALE STEEL] (magnetic alloy, precision resistance alloy, electric heating alloy, etc.), nickel base superalloy and nickel base corrosion resistance alloy and shape memory alloy. In energy development, chemical, electronics, navigation, aviation and aerospace sectors, nickel alloys are widely used.
Nickel can form many alloys with copper, iron, manganese, chromium, silicon and magnesium. Nickel copper alloy is the famous Monel alloy, it has high strength, good plasticity, in the atmosphere below 750 degrees, stable chemical properties, widely used in electrical industry, vacuum tube, chemical industry, medical equipment and Marine industry.
A.Definition of Nickel-Based Alloys:
Nickel-based alloy is generally referred to as the alloy with Ni content of more than 30wt%, and the Ni content of common products is more than 50wt%. Due to its super high temperature mechanical strength and corrosion resistance, the[SCALE STEEL] alloy combined with iron and cobalt alloy is called Superalloy. It is generally applied in the high temperature environment above 540℃, and according to its application occasions, Selection of different alloy design, mainly used in special corrosion resistance environment, high temperature corrosion environment, need to have high temperature mechanical strength equipment. It is often used in aerospace (aircraft engine, gas turbine, engine valve), energy (furnace parts, heat insulation, heat treatment industry, oil and gas industry), petrochemical industry (seawater desalination plant, petrochemical transmission pipeline), or special [SCALE STEEL]electronic/photoelectric (battery shell parts, wire frame, computer monitor mesh cover) and other fields.
B.Origin and Development:
The nickel-based alloy was developed in the late 1930s. The first nickel-based alloy Nimonic75(Ni-20Cr-0.4Ti) was produced in Britain in 1941. Nimonic 80(Ni-20Cr-2.5Ti-1.3Al) was prepared by adding Al to improve the submersible strength. The United States in the mid-1940s, Russia in the late 1940s, China in the mid-1950s have also developed nickel-based alloys. The development of nickel base alloy includes two aspects, namely the improvement of alloy composition and the innovation of production technology.
For example, in the early 1950s, the development of vacuum smelting technology created conditions for the refining of nickel-based [SCALE STEEL]alloys containing high Al and Ti, which led to a substantial increase in the strength and operating temperature of alloys. In the late 1950s, due to the increase in the working temperature of turbine blades, higher high-temperature strength of alloys was required. However, high strength of alloys made it difficult or even impossible to deform. Therefore, a series of casting alloys with good high-temperature strength were developed by adopting precision casting technology. In the mid-1960s, directional crystals and single crystal superalloys with better properties were developed, as well as powder metallurgy superalloys.
In order to meet the needs of ships and industrial gas turbines, a batch of high Cr nickel base alloys with good thermal corrosion resistance and stable microstructure have been developed since the 1960s. In a period of about 40 years from the early 1940s to the late 1970s, the operating temperature of the nickel-based alloy [SCALE STEEL]increased by 1,100℃ from 700, an average increase of about 10℃ per year. Today, nickel-based alloys can be used at temperatures in excess of 1,100℃, from the initial Nimonic75 alloy with simple composition, to the recently developed MA6000 alloy with tensile strength of 2,220MPa and yield strength of 192MPa at 1,100℃. Its endurance strength at 1,100℃/137MPa is about 1,000 hours, which can be used in aero-engine blades.
C.Characteristics of Nickel-Based Alloys:
Nickel-based alloy is the most widely used and strongest material in superalloys. The name superalloy derives from the material characteristics.
(1) Excellent performance: it can maintain high strength at high temperature, and has excellent mechanical properties such as anti-creep and [SCALE STEEL]anti-fatigue, as well as oxidation and corrosion resistance and good plasticity and weldability.
(2) Super complicated alloy addition: more than ten alloying elements are often added to nickel-based alloys to improve corrosion resistance in different environments; And solid solution strengthening or precipitation strengthening.
(3) Extremely harsh working environment: Nickel-based alloy is widely used in various harsh working conditions, such as the high-temperature and high-pressure part of the gas chamber of aerospace engine, the structural parts of nuclear energy, petroleum, Marine industry, corrosion resistant pipelines, etc.
D.Microstructure of Nickel-Based Alloys:
The crystal structure of nickel-based alloy is mainly high temperature stable face-centered cube (FCC) structure. In order to improve its heat resistance, a large number of alloy-elements are added. These elements will form various secondary phases and improve the high temperature strength of Nickel-based alloy. The secondary phase consists of Coherent metallitic compounds such as MC, M23C6, M6C, and M7C3 in various [SCALE STEEL]forms, usually distributed in grain boundaries, and coherent Ordering such as γ' or γ'. The chemical composition of γ' and γ' phase is roughly Ni3(Al, Ti) or Ni3Nb. This ordered phase is very stable at high temperature, and excellent latent failure strength can be obtained through their strengthening.
With the increase of alloying degree, the microstructure of γ' phases has the following trend: the number of γ' phases increases gradually, the size increases gradually, and the γ' phases change from spherical to cubic, and the size and shape of different γ' phases appear in the same alloy. In addition, γ+γ' eutectic is formed in the solidification process, and discontinuous granular carbide precipitates from the grain boundary and is surrounded by γ' thin films. These micromicrostructure changes improve the [SCALE STEEL]properties of the alloy. In addition, the chemical composition of modern nickel-based alloys is very complex, and the saturation of the alloys is very high, so it is necessary to control the content of each alloy element (especially the major strengthening elements). Otherwise, other harmful intermediate metal phases, such as σ and Laves, may be precipitated during use, which will damage the strength and toughness of the alloy.
E.Role and Brand of Alloying Elements:
Nickel-based alloy is one of the most widely used superalloys with the highest strength. The addition of a large amount of Ni is the stable element of Wastian iron phase, which makes the nickel-based alloy maintain FCC structure and can dissolve more other alloy elements, and also maintain good microstructure stability and plasticity of the material. While Cr, Mo and Al have oxidation and corrosion resistance, and have [SCALE STEEL]a certain strengthening effect. The strengthening of nickel-based alloys can be divided into:
(1) Solid solution strengthening elements, such as W, Mo, Co, Cr and V, cause local lattice strain at the base of Ni-Fe by the difference between the atomic radius and the base material;
(2) The precipitation of strengthening elements, such as Al,Ti, Nb and Ta, can form integrated and ordered A3B intermetallic compounds, such as Ni3(Al,Ti) and other strengthening phases (γ '), so that the alloy can be strengthened effectively and obtain higher high-temperature strength than iron base superalloy and cobalt base alloy.
(3) Grain boundary strengthening elements, such as B, Zr, Mg and rare earth elements, can enhance the high temperature properties of the alloy. Generally, the brand of nickel base alloy is named by its development manufacturer, such as Ni-Cu alloy, also known as Monel alloy, common such as Monel 400, K-500 and so on. Ni-Cr alloy is commonly known as Inconel alloy, which is a common nickel-based heat-resistant alloy. It is mainly used in oxidizing medium conditions, such as Inconel 600, 625, etc. The Inconel alloy is not as hot as the nickel-based alloy, but it is also an inexpensive alternative to the Inconel alloy, which is used in the lower temperature components of jet engines and in petrochemical reactors, such as Incoloy 800H and 825. The Inconel and Incoloy Coloy are separated out [SCALE STEEL]with enhanced elements, such as Ti, Al, and Nb, so that the alloy can maintain good mechanical strength and corrosion resistance at high temperatures. It is also widely used in jet engine components, such as Inconel 718 and Incoloy A-286. Ni-Cr-Mo(-W)(-Cu) alloy is known as Hastelloy corrosion resistant alloy, wherein Ni-Cr-Mo is mainly used in reducing medium corrosion conditions. Hastelloy is represented by brands such as C-276, C-2000, etc.
F.Properties of Nickel-Based Alloys:
1. High Temperature (Instantaneous) Intensity:
Nickel-based alloys have higher tensile strength at room temperature (TS= 1200-1,600; YS= 900-1,300 MPa), and has good ductility. It includes [SCALE STEEL]the use of the above ionic and covalent bonded γ-γ 'or γ-γ' precipitates with high melting point and high strength at room temperature, coupled with a large number of slip systems and ductile Wastein iron phase base, the concept of composite materials to obtain excellent mechanical properties with both strength and plasticity.
2. Latent Strength:
Under the constant load at high temperature (T/Tm>0.5), the material alloy slowly produces plastic deformation phenomenon, because the material alloy has the best resistance to high temperature diving ability, and is widely used in a variety of high temperature environment, as a load bearing parts.
It can be divided into three stages. In the stage of Primary Creep, the deformation rate is relatively high, but it slows down with the increase of strain due to work hardening. When the deformation rate reaches a certain minimum value and is close to a constant, it is called Secondary or Steady-StateCreep, which is the result of balance between work hardening and dynamic recovery. The latent strain rate required in engineering material design is the strain rate at this stage. At the third stage (Tertiary Creep), the strain rate is increased exponentially with the increase in strain due to necking, and finally failure is achieved.
The relationship between stress and strain rate varies with the different mechanisms of submersion. Generally speaking, the increase of temperature or stress will increase the deformation rate of steady-state submersion and shorten the submersion lifetime. The mechanism of submersion can be divided into (1) differential displacement submersion: With the help of high temperature, the differential displacement may slip along the slip plane and then deformation occurs. (2) Diffusion Creep: Nabarro-Herring Creep, which is caused by atom movement and dispersed along grain, is the main mechanism at high temperature. Diffusion along grain boundaries, called Coble Creep, is the dominant mechanism at low temperatures. Therefore, the smaller the grain size, the more easily the diffusion latent occurs. (3) grain boundary slip: Because the grain boundary is weak at high temperature, the material is easy to slip along the grain boundary, resulting in intergranular cracks. Therefore, the smaller the grains at high temperature, the easier it is to produce grain boundary slip slip and intergranular cracks. The deformation of metals is often an interaction between differential displacement and grain boundary slip. Nickel base alloy can greatly inhibit differential displacement due to the precipitation of medimetallic phase, and carbide precipitated on grain boundary can help to resist the displacement caused by grain boundary slip, which makes nickel base alloy has better resistance to displacement than other metal materials.
In addition, when the traditional casting method is changed to unidirectional solidified long columnar crystal, the resistance to high temperature diving will be improved, and when it is further grown into single crystal, the resistance to high temperature diving will be greatly improved. Therefore, special technologies such as directional eutectic solidification, single crystal casting and powder metallurgy have been developed for nickel-based alloys, which further enhance the resistance to high temperature diving of nickel-based alloys.
3. Corrosion Resistance:
Corrosion control of materials has been regarded as the best way to practice material economy in industry. The selection of materials for industrial equipment at the design end is not just about the price of materials; issues such as the time required for replacement and maintenance, as well as the overall efficiency of use and, more importantly, safety, need to be more accurately considered in design and selection. Nickel-based alloys have good corrosion resistance in strong reducing corrosion environment, complex mixed acid environment, and solutions containing halogen ions. Nickel-based corrosion resistant alloys can be represented by Hastelloy alloy. As mentioned above, Ni elements can accommodate more alloys in crystallography to improve their ability to resist corrosion environment. Moreover, Ni itself has certain anti-rot properties, such as excellent resistance to stress corrosion and caustic corrosion of Cl ions. The addition of passivated elements in nickel-based alloy can form solid solution with the substrate phase, which improves the corrosion potential and thermodynamic stability of the material. For example, Cu, Cr and Mo are added to Ni to improve the corrosion resistance of the whole alloy.
In addition, alloying elements can promote the formation of dense corrosion product protective film on the alloy surface, such as the formation of Cr2O3, Al2O3 and other oxide layers, providing a protective layer for materials to resist various types of corrosion environment. Therefore, nickel-based corrosion resistant alloys usually contain Cr and Al one or both of these two elements, especially when the strength of the alloy is not the main requirement. Special attention should be paid to the high-temperature oxidation resistance and thermal corrosion resistance of the alloy. The oxidation resistance of the superalloy varies with the alloying element content. Although the high-temperature oxidation behavior of the superalloy is very complicated, the oxidation resistance of the superalloy is usually expressed by the oxidation kinetics and the composition of the oxide film.
Pure nickel materials such as Ni 200/201(UNS N02200/ UNS N02201) are commercial pure nickel (>99.0%). It has good mechanical properties and excellent corrosion resistance, and other useful physical properties, including its magnetic properties, magnetostrictivity, high thermal and electrical conductivity. Ni 200's resistance to corrosion makes it particularly useful in applications where purity is required, such as food products, man-made fibers, and caustic soda. It is also widely used in structural applications where corrosion resistance is a major consideration. Other uses include sky and missile parts. Nickel base corrosion resistant alloys include Hastelloy alloy and Ni-Cu alloy, the main alloy elements are Cr, Mo, Cu, etc., has good comprehensive performance, can withstand various acid corrosion and stress corrosion. Monel, the earliest application of Ni-Cu component; In addition, there are Ni-Cr alloy (nickel base heat resistant alloy, corrosion resistant alloy in corrosion resistant alloy), Ni-Mo alloy, Ni-Cr-Mo alloy (C series of Hastelloy alloy) and so on. In terms of corrosion resistance, Ni-Cu alloy has better corrosion resistance than Ni in reducing medium, and better corrosion resistance than Cu in oxidizing medium. Under the condition of no oxygen and oxidant, it is the best material to resist high temperature fluorine gas, hydrogen fluoride and hydrofluoric acid. Ni-Cr alloy is mainly used in oxidizing medium conditions. Can resist high temperature oxidation and corrosion containing sulfur, vanadium and other gases, Cr content in the alloy is greater than 13% to cause effective corrosion resistance, and the higher the Cr content, the better the corrosion resistance, but in the non-oxidizing medium such as hydrochloric acid, corrosion resistance is poor, this is because non-oxidizing acid is not easy to make the alloy oxide film, at the same time there is a dissolution effect on the oxide film.
The addition of elements containing Mo and Cu in the nickel base alloy can improve the corrosion resistance of the reducing acid of the protective layer. For example, Ni-Mo alloy is mainly used under the corrosion condition of reducing medium, and it is the best kind of alloy resistant to hydrochloric acid corrosion, but in the presence of oxygen and oxidant, the corrosion resistance will decrease significantly. Ni-cr-mo (-W) alloy has the properties of Ni-Cr and Ni-Mo alloy mentioned above, and is mainly used in mixed medium of oxidation and reduction. This kind of alloy has good corrosion resistance in high temperature hydrogen fluoride gas, hydrofluoric acid solution containing oxygen and oxidant, and wet chlorine gas at room temperature. The importance of Mo nickel-based corrosion resistant alloys is that they can resist both oxidizing and reducing acids. For example, titanium and stainless steel are only resistant to oxidizing acids. For example, Hastelloy C-276 or C-2000 alloy is a Ni-Cr-Mo alloy containing W.
Containing very low silicon and carbon, is generally considered to be universal corrosion resistant alloy, has in oxidation and reduction two atmosphere state, has excellent corrosion resistance to most corrosive media, as well as excellent corrosion resistance to pore corrosion, crack corrosion and stress cracking corrosion, such alloy because of the reduction of C, Si, so can control carbide precipitation, but also improve its corrosion resistance. Because of this kind of characteristics, so widely used as chemical equipment and other harsh environment application materials. In addition, Ni-Cr-Mo-Cu alloys have the ability to resist both nitric acid and sulfuric acid corrosion, and have good corrosion resistance in some oxidation-reducing mixed acids.
G.Production Technology of Nickel-Based Alloys:
The traditional production process of nickel-based alloy is nickel raw material → nickel alloy ingot (smelting)→ secondary refining → processing → finished product → downstream application.
Other special technologies such as directional solidification, single crystal casting and powder metallurgy have been developed to meet the special needs of aerospace applications. In this paper, the traditional key technologies for the production of nickel-based alloys, such as melting, hot working and heat treatment, are briefly introduced.
The composition of nickel base alloy is mainly Ni-Cr-Fe, and the addition of other elements such as Cu, Si, Mn, Al, Ti, Nb, W, C, etc. The effects of these elements on superalloying materials are generally known from the literature. However, in order to recombine or add new alloy components and understand their interactions in microstructures, recently available material property simulation software can be used to calculate the thermodynamics and dynamics of alloy systems, helping to provide cost-effective direction, which can improve the efficiency of alloy design. The realization of alloy design must be completed by melting technology. The smelting of nickel-based alloy is mainly divided into Electric Arc Furnace (EAF)+ Electro-Alag Remelting, EAR) and high grade Vacuum Induction Melting (VIM)+ electroslag remelting refined products. In order to obtain more pure and purified alloy steel liquid during smelting, reduce the content of gas and harmful elements; At the same time, due to the existence of easy oxidizing elements such as Al and Ti in some alloys, non-vacuum smelting is difficult to control; In order to obtain better thermoplasticity, nickel-based alloys are usually smelted by vacuum induction furnace, or even produced by vacuum induction melting and vacuum consumable furnace or electroslag furnace remelting.
The main purpose is to accurately hit 7-12 alloy components and remove impurity elements and harmful gases, and then maintain the compact structure without surface defects with the ingot solidification control technology. Because the alloy is smelted in the true space environment, the formation of non-metallic oxide inclusions can be limited, and the unnecessary trace elements and dissolved gases, such as oxygen, hydrogen and nitrogen, can be removed with high vapor pressure. To get an accurate and uniform alloy composition. The ingot from VIM smelting can be used as electrode of ESR for refining. The purpose of the ESR process (FIG. 10) is to obtain a purer ingot with low impurity. The slag/refining control technology is used to remove coarse intermediates, and the ingot solidification control technology is used to achieve the goal of pure composition, compact structure and uniform microstructure. Vacuum induction furnace is usually used for melting to ensure composition and control gas and impurity content, and vacuum remelting - precision casting technology is used to make parts. In the case of superalloy processing, the choice of smelting method will affect the impurity zone (i.e. the abnormal segregation of the composition). In general, the impurity and defects (such as pores) are related to the alloy composition and casting technique.
Nickel-based alloys are often processed by forging, rolling, etc., and for the alloy with poor thermoplasticity, even by extrusion after opening rolling or direct extrusion technology with mild steel (or stainless steel) sheath. The general purpose of deformation is to break the casting structure and optimize the microstructure. The high deformation impedance and the instability of thermal ductility of nickel-based alloys at high temperature increase the difficulty in the process of nickel-based alloys. Generally, nickel-based alloys have high strength and are not easy to work in cold and hot. Taking C-276 as an example, the deformation impedance at high temperature is about 2.4 times that of stainless steel. And the high hardening rate of cold working makes its strength up to 2 times of stainless steel. In addition to the high temperature deformation impedance, the occurrence of different deformation resistance of thermal ductility or inclusion zone at different temperatures should be considered in hot working, and the impure zone will harm the high temperature mechanical properties of the alloy.
The temperature range in which both resistance and thermal ductility of superalloy castings are allowed to be processed can be regarded as the working range of the hot working process. After processing or partial casting alloys need heat treatment. The purpose of solution heat treatment of nickel-based alloys is to control the grain size according to the requirements of product properties (such as toughness or creep), and to promote recrystallization and stress relief at high temperature, as well as to precipitate bad phases, such as M23C6, δ, η, etc., during the process before dissolution. For solid solution enhanced nickel-based alloys, the heat treatment procedures are as follows: (1) the temperature is raised to the point at which precipitates can dissolve, (2) the temperature is held to achieve the desired grain size, and (3) the cooling rate must be controlled to avoid precipitation such as sensitized phase M23C6.
Generally speaking, the mechanical properties of solid solution treatment are affected by the grain size and intergranular precipitates, and the temperature and time of solid solution treatment should be adjusted according to the alloy composition and the pre-process condition to achieve the desired properties. In addition, when the Ni-base alloy containing Cr reached 400~800oC, chromium carbide (M23C6) precipitated into the grain boundary, which made chromium deficiency Zone formed around the grain boundary, and thus reduced the corrosion resistance of this zone. It is called sensitization, which easily leads to intergranular erosion (IGA) and stress corrosion fracture (IGSCC). On the other hand, the heat treatment of the Wastian Fe-series precipitation enhanced nickel-base alloy includes (1) the solution stage at which the precipitation is raised to the temperature of resolution and (2) the aging stage at the temperature holding in the γ/ γ' two-phase region. The solid solution makes the precipitates dissolve back, the elements required for γ' precipitation in the base increase, and achieve the homogenization of the added elements, and control the grain size of the substrate γ phase; In the aging stage, the volume fraction, morphology, size and distribution of γ' can be controlled by holding temperature, time, cooling rate and multi-stage aging. The distribution and morphology of the main precipitates can affect the creep and corrosion resistance properties. Generally speaking, the intensification phase is usually on the nanoscale, which is not easy to be observed by ordinary metallographic methods. The morphology of precipitates is often determined by penetration electron microscopy (TEM) with high power.
In recent years, the global production of nickel-based alloys will continue to increase, especially for petrochemical EAF grade and energy/aerospace VIM grade nickel-based alloys. The Asian market is growing most rapidly, and their applications in aerospace and energy will increase significantly.
Smelting aluminum can be done by thermal reduction, but the cost is too high. Electrolysis method is used in industrial aluminum smelting. The main principle is Hall-Heru aluminum electrolysis method: Pure alumina as raw material using electrolytic aluminum, because pure alumina melting point high (about 2045℃), it is difficult [SCALE STEEL]to melt, so industrial melting cryolite (Na3AlF6) as a flux, so that alumina at about 1000℃ dissolved in liquid cryolite, cryolite and alumina melting body, and then in the electrolytic cell, Use carbon block as Yin and Yang poles for electrolysis.
There are four links in the production process of aluminum forming a complete industrial chain: aluminum ore mining - alumina production - electrolytic aluminum smelting - aluminum processing and production.
In general, two tons of aluminum ore produce one ton of alumina; Two tons of alumina produce one ton of electrolytic aluminum.
To date, many methods have been proposed to extract alumina from aluminium ore or other aluminum-containing raw materials. Some[SCALE STEEL] methods have been phased out for technical and economic reasons, while others are still in the experimental research stage. The proposed alumina production methods can be classified into four types, namely, alkali process, acid process, acid-base combined process and thermal process. At present, only the alkali process is used in large-scale industrial production.
Bauxite is one of the most important aluminum resources in the world, followed by alum, nepheline, clay and so on. At present, the [SCALE STEEL]world alumina industry, with the exception of Russia, which uses nepheline to produce part of the alumina, almost all of the world's alumina is produced from bauxite as raw material.
Bauxite is an ore consisting mainly of diaspore, diaspore, or diaspore. Up to now, all the bauxite resources which can be used for alumina production in China are diaspore type bauxite.
The content of alumina in bauxite varies greatly, from about 30% to more than 70%. Bauxite contains chemical composition in addition to alumina, the main impurities are silicon oxide, iron oxide and titanium oxide. In addition, there are a small amount or trace of calcium and magnesium carbonate, potassium, sodium, vanadium, chromium, zinc, phosphorus, gallium, scandium, sulfur and other elements of the [SCALE STEEL]compound and organic compounds. Gallium content in bauxite is small, but in the process of alumina production will gradually accumulate in the circulating mother liquor, so that it can be effectively recovered and become the main source of gallium production.
One of the main indicators to measure the [SCALE STEEL]quality of bauxite is the ratio of alumina content and silica content in bauxite, commonly known as aluminum-silicon ratio.
In the production of alumina by the alkali process, aluminium ore is treated with a base (NaOH or Na2CO3) to convert the alumina in the ore into a solution of sodium aluminate. Impurities such as iron and titanium and most of the silicon in the ore become insoluble compounds. The insoluble residue (red mud) is separated from [SCALE STEEL]the solution, then washed and discarded or treated comprehensively to recover the useful components. Pure sodium aluminate solution can be decomposed into aluminum hydroxide, after separation, washing and calcination, alumina products are obtained. The decomposing mother liquor is then recycled to treat another batch of ore. Alumina production by alkali process includes Bayer process, sintering process and Bayer - sintering combined process.
Bayer process is a method of extracting alumina from bauxite, which was invented by the Austrian chemist K. J. Bayer in 1889 ~ 1892. There have been many improvements in process technology for over a hundred years, but[SCALE STEEL] the basic principles have not changed. In honor of Bayer's great contribution, the method has been using the name Bayer method.
The Bayer process consists of two main processes. The first is the dissolution of alumina from bauxite under certain conditions (the term used by the alumina industry is leaching). The following is the same) process, and then the process of water resolution in the solution of sodium aluminate supersaturated by aluminum hydroxide, which is the two patents filed by Bayer. The essence of Bayer process is to extract[SCALE STEEL] alumina from bauxite by hydrometallurgy. In the Bayer process of alumina production, siliceous minerals can cause the loss of Al2O3 and Na2O.
In the Bayer process, bauxite is crushed and wet-milled along with lime and circulating mother liquor to make qualified pulp. After predesilication, the pulp is preheated to dissolution temperature for dissolution.
After the dissolution of the pulp after evaporation and cooling into the dilution and red mud (solid residue after dissolution) settlement separation process. The secondary steam produced by the self-evaporation process is used to preheat the pulp. After settlement and separation, the red mud is washed into the red mud yard, and the separated crude liquid (sodium aluminate solution containing solid floating matter, the same below) is sent to the leaf filter. Coarse liquid through the leaf filter to remove most of the floating matter is called semen. Semen enters the decomposition process to get aluminum [SCALE STEEL]hydroxide by seed decomposition. After the decomposed alumina is graded and separated and washed, part of it is returned to the crystal seed decomposition process, and the other part is roasted to get alumina products. After the seed decomposition, the mother liquor is returned to the dissolution process through evaporation to form a closed cycle. Alumina is obtained by roasting aluminum hydroxide.
The dissolution conditions required for different types of bauxite vary greatly. The diaspore type bauxite can be well dissolved at 105℃, diaspore type bauxite can have a faster dissolution rate at 200℃, and diaspore type bauxite must [SCALE STEEL]be dissolved at a temperature higher than 240℃, its typical industrial dissolution temperature is 260℃. Dissolution time is not less than 60 minutes.
The Bayer process is used to treat bauxite with high aluminum-Si ratio. The process is simple, the product quality is high, and the economic [SCALE STEEL]effect is far better than other methods. The advantages are more outstanding when it is used to treat the easily dissolved bauxite. At present, more than 90 percent of the world's production of alumina and aluminum hydroxide is produced by the Bayer process. Due to the special nature of China's bauxite resources, about 50% of China's alumina is produced by Bayer process. The process combining Bayer process and sintering process is called combined process. The combined method can be divided into parallel combined method, series combined method and hybrid combined method. The method used to produce alumina is mainly determined by the grade of the bauxite (i.e. the aluminum-silicon ratio of the ore). From the general technical and [SCALE STEEL]economic point of view, the sintering method is usually used when the ratio of aluminum to silicon of ore is about 3. The Bayer method can be used for ore with Al/Si ratio higher than 10. When the grade of bauxite is between the two, the combined method can be used to give full play to the advantages of Bayer method and sintering method, and achieve better technical and economic indicators. At present, the global annual alumina production is about 55 million tons, and China's alumina production is about 6.8 million tons.
Aluminum alloy smelting has the characteristics of heat consumption, easy oxidation, easy inspiration, easy absorption of impurities metal.
1) Burning More Calories:
Although the melting point of aluminum is low, the potential heat of melting is large, the specific heat is large, the blackness is small, the [SCALE STEEL]reflection of heat is strong, and other commonly used metals such as iron, copper, when melting heat consumption.
2) Easily Oxidation:
Aluminum has a great affinity for oxygen and it can oxidize very quickly to form Al2O3. Although the alumina film formed on the melt surface has a protective effect, it is difficult to remove the oxide film once it is damaged and enters [SCALE STEEL]the melt. Because one Al2O3 is not easy to reduce, the second is its density and melt similar. It is suspended in the melt, with the melt into the ingot, to the quality of processing materials will be adversely affected. What's more, aluminum oxide is a good carrier of various gases, and its presence will make aluminum melt absorb a lot of hydrogen. Therefore, reducing oxidation as much as possible is an important problem in aluminum alloy smelting.
3) Easy to Inhale:
Aluminum and aluminum alloys have a strong ability to inhale (mainly hydrogen), especially in the presence of water vapor or reducing atmosphere in the furnace gas. Although the absolute amount of hydrogen absorption of aluminum [SCALE STEEL]and aluminum alloy is not large, but at the melting point, the solubility of hydrogen in the solid phase and the liquid phase is very different, the formation of porosity and porosity of the ingot crystallization tendency is very large. Therefore, reducing hydrogen absorption as much as possible is another important problem in aluminum and aluminum alloy smelting.
4) Easy to Absorb Metal Impurities:
Some of the alloyed elements in aluminium and aluminium alloys are highly chemically active. They not only absorb iron dissolved directly from iron crucible and tools, but also replace iron, silicon, zinc and other metallic impurities [SCALE STEEL]from many oxides in furnace lining and many chlorine salts in fluxes. Once these metallic impurities enter the aluminum melt, they cannot be removed. And the more times of melting, the higher the impurity content, the greater the impact on the performance of the alloy, the serious grade degradation of pure aluminum, the alloy composition exceeds the standard and scrapped. [SCALE STEEL]Therefore, to prevent the pollution of metal impurities is the third important problem in the smelting of aluminum and aluminum alloy.
65Mn spring steel, manganese to improve hardenability, φ12mm steel can be quenched in oil, surface decarburization tendency is smaller than silicon steel, after heat treatment of the comprehensive mechanical property is better[SCALE STEEL] than carbon steel, but has overheating sensitivity and temper brittleness. It can be used as small size flat, round spring, cushion spring, spring spring, spring ring, valve spring, clutch spring, brake spring and cold drawn wire cold coil coil spring, etc.
Execution standard: GB/T 1222-2007
● Characteristics and scope of application:
65mn strength. Hardness, elasticity and hardenability are higher than No. 65 steel, with overheating sensitivity and tempering brittleness tendency, water quenching has the tendency to crack formation. Annealed state machinability [SCALE STEEL]is acceptable, cold deformation plasticity is low, poor weldability. Plate springs under moderate load, helical springs and spring washers up to 7-20mm in diameter. Spring ring. High wear resistance parts, such as grinder spindle. Spring clamp. Precision machine tool screw. Cutting tools. Sleeve rings for spiral roller bearings. Railway rails, etc
● Chemical composition(%):
Carbon C: 0.62 ~ 0.70 Si: 0.17 ~ 0.37
Manganese Mn: 0.90 ~ 1.20[SCALE STEEL]
Sulfur S: ≤0.035
Chromium Cr: ≤0.25
Nickel Ni: ≤0.30
Copper Cu: ≤0.25
● Mechanical Properties:
Tensile strength σb (MPa) : 825~925
Elongation δ10 (%) : 14~22.5
Reduction rate of cross-section (%) : no more than 10
Hardness: hot rolling,≤302HB; Hot rolling + heat treatment,≤321HB
● Heat Treatment Specification and Metallographic Structure:
Heat treatment specification: [SCALE STEEL]quenching 830℃±20℃, oil cold; Temper 540℃±50℃(for special needs,±30℃).
Metallographic Structure: Tretinite.
● Critical point temperature (approximate value) Ac1=726℃, Ac3=765℃, Ar3=741℃, Ar1=689℃, Ms=270℃.
Normalizing specification: temperature 810±10℃, air cooling. 
● State of delivery: hot[SCALE STEEL] rolled steel to heat treatment or no heat treatment of delivery, cold drawn steel to heat treatment of delivery.
● Supply specifications:
Disk circle: Φ5.5 ~ 16mm
Forging: Φ160 ~ 450mm
65Mn density ρ= 7.85g/cc, the steel can be cold rolled into steel plate, steel strip and steel wire, the production of spring. 65Mn can also be made into tools such as fitter's chisel, cutting needle, etc. 65Mn steel can be made of general section size of 8 ~ 15mm or so small spring, such as a variety of small size flat, round [SCALE STEEL]spring, cushion spring, spring spring.
760℃×30min insulation, and then at 20℃/h cooling rate to 700℃×6h furnace cooling, to obtain a complete spheroidized structure, uniform size.
Argon arc welding butt welding process
In order to reduce the consumption of electrodes, DC positive connection is selected for wire butt welding test, that is, DC power supply is selected, the wire is connected to the positive pole of the power supply, and the tungsten pole is connected to the negative pole of the power supply.
The tungsten electrode containing 1% or 2% thorium oxide has high electron emission efficiency, good current carrying capacity, good anti-pollution performance, easy arc starting and stable arc. For ease of handling, a thinner thorium tungsten electrode with a diameter of 2 mm was selected and the front end of the electrode was sharpened.
Argon is chosen as the protective gas because of its low arc voltage characteristic, which is especially useful for manual arc welding of thin sheet and wire.
Dc manual argon arc welding machine was selected for the test. Before welding, the two ends of the wire were carefully smoothed.[SCALE STEEL] In order to prevent the porosity of the welding spot, the oil at the end was cleaned with acetone. Place the polished wire at both ends on the flat and clean aligning plate (Figure 1), so that the two ends are aligning, leaving no gap at the joint, and press both sides of the joint with a pressing iron. Connect the wire to the positive electrode of the welder and the tungsten electrode to the negative electrode, and then switch the current to 20 A, 15 A, 10 A and 8 A respectively for welding. When welding, the ignition point arc next to the joint and make it burning stable, the arc moved to the joint to melt the joint metal and quickly extinguish the arc, at the same time,[SCALE STEEL] slightly apply the top forging force, after cooling to complete the welding process, the welding process does not use filler wire.
It is found that when the welding current is 20 A, the arc combustion is intense, the metal spatter at the joint is serious, and the solder joint collapse is serious. When the current is adjusted to 15 A, the arc combustion is stable and the pool spatter is less, but the weld is still collapsed. However, when the current drops to 10 A, arc initiation is easy, arc combustion is stable, and there is no collapse phenomenon at the weld. Figure 2 shows the shape of the welded joint photographed with A digital camera under Leica MZ6 stereo microscope at a welding current of 10 A. It can be seen that the cylindricity of the joint is good, and it can meet the requirements of the line saw after grinding. When the current is adjusted below 8 A, it is difficult to start the arc and the arc is unstable, so it is difficult to complete the welding process.
Welded joint test
Due to the tendency of 65Mn steel to overheat, the welding heat affected zone has great influence on the mechanical properties of the joint. The joint of 65Mn steel wire with diameter of 0.7mm is very hard and brittle after argon arc welding. If the welding spot is gently bent, it will be brittle at the fusion line or weld, and the fracture shows obvious brittle fracture morphology. The obtained joint consists of a weld and a heat-affected zone, and the microhardness of each zone from the weld center to the base metal is tested along the joint axis. The measurement results show that from the base metal to the heat-affected zone and the middle of the weld, the microhardness increases sharply, and the hardness in the middle of the weld reaches HV 1 060, which indicates that hard and brittle structures are formed in the heat-affected zone and the middle of the weld. For this kind of joint with hard and brittle structure, in order to improve its toughness and plasticity, reduce its hardness, hardness, strength, plasticity and toughness of the appropriate match, must be the welding joint for appropriate tempering treatment. After heat treatment, the brittleness of the heat affected zone should be eliminated, while the base material should be able to maintain a certain strength and elasticity. Tempering is carried out in the box-type resistance furnace, and the tempering process is shown in Table 1. The tempered steel wire welding joint is carefully polished so that its diameter is roughly equal to that of the base material, and then the tensile test is carried out on the WE-50 tensile testing machine. Take three samples of each tempering treatment, and take the average value of their tension.
It can be seen from the test that after heat treatment above 330℃, the elasticity of the base material basically disappears, and the fractures all occur in the base material, rather than in the solder joint and its heat-affected zone, which indicates that although the brittleness of the heat-affected zone disappears completely after heat treatment, the strength of the base material is greatly reduced (the tensile strength of the base material used is 1 663 MPa after the test). At 260℃ for 10 min, although the elasticity of the material is basically unchanged, the brittleness of the heat affected zone cannot be eliminated. When the heating temperature is 280℃ and the heat is held for 10 min, the effect is the best. The tensile strength of the heat affected zone is only about 20% lower than that of the base material, and the elasticity of the base material is less disappeared. The microhardness of the welding head tempered at 280℃ was tested along the axis in each zone of the longitudinal profile. It was found that the maximum hardness value of the weld was reduced to about HV 500, which was about 1 times lower than that of the untreated one. Welded ring wire should not only meet the requirements of strength and elasticity, but also have a certain fatigue strength.
1RK91 is one kind of super martensitic stainless steel with high strength and toughness developed by Sandvik in Sweden in the early 1990s. The UNS number of [SCALE STEEL]1RK91 is S46910, and according to the naming method in our country, it is 02Cr12Ni9Mo4Cu2TiAl.
Chemical Element Content of 1RK91 (%):
Si: 0.5 or less;
Mn: 0.5 or less;
P: 0.02 or less.
S: 0.005 or less;
Cr: 12 or less;
Ni: 9 or less;
Cu: 2 or less;[SCALE STEEL]
Mo: 4 or less;
Ti: 0.9 or less;
Al: 0.4 or less.
Different from the traditional idea that alloy carbide or nitride is the main hardening phase to make the steel achieve high strength, 1RK91 steel uses Fe-Cr-Ni as matrix, Cu, Mo, Ti, Al as strengthening elements, controlling C to 0.02% or less. Firstly, the alloy elements were fully dissolved into the matrix by solution treatment, and then quickly cooled to [SCALE STEEL]obtain the susaturated plate-strip martensite structure. After aging treatment, precipitation hardening phase mainly composed of intermetallic compounds was precipitated from martensite matrix, and part of martensite was reversed to form reversed austenite.
1RK91 steel uses intermetallic compounds as the strengthening phase and reversed austenite as the toughening phase to obtain the best strength and toughness coordination. As an element harmful to strength and toughness, C is [SCALE STEEL]included in the control presence. Both theoretically and practically, the development of this kind of steel is regarded as a breakthrough in ultra-high strength steel.
① Excellent mechanical properties, can achieve very high tensile strength and hardness level.
② Corrosion resistance equivalent[SCALE STEEL] to 304L or 316L under corresponding conditions.
③ Maintain mechanical properties at temperatures up to at least 400°C.
④ Very good relaxation property.
⑤ Good weldability.
1RK91 steel through 1000℃ after solid solution, can be cold processing into bars, plates, steel wire and steel strip and other metallurgical products, then after 450 ~ 475℃ aging treatment, in the high strength condition of 3000MPa still has good [SCALE STEEL]plasticity and excellent fracture toughness; At the same time, it also has excellent cold working and welding properties, good corrosion resistance and over-aging resistance.
Sandvik also verifies that 1RK91 steel does not have any potential cytotoxicity through Vitro (cytotoxicity) test, so it can safely contact with human tissues, body fluids or blood, in accordance with the requirements of all relevant allergy [SCALE STEEL]and skin irritation test standards.
1RK91 is used to manufacture parts and instruments for use in a variety of complex conditions, such as electric razor mesh blades, medical suture needles, surgical blades, drills, scissors, files, clamps, punches, guides and other surgical instruments.
253MA is a kind of heat-resistant austenitic stainless steel designed for applications requiring high creep strength and good [SCALE STEEL]corrosion resistance.
The chemical composition of 253MA is balanced, so that the steel has the best comprehensive performance in the temperature range of 850℃-1100℃, extremely high oxidation resistance, oxidation skin temperature up to 1150℃; [SCALE STEEL]Very high creep deformation resistance and creep fracture strength; In most gas medium has good resistance to high temperature corrosion and brush corrosion resistance; High yield strength and tensile strength at high temperature; Good formability and weldability, and adequate machinability.
In addition to the alloying elements chromium and nickel, the 253MA stainless steel also contains small amounts of Rare Earth Metals (REM), which significantly improves its oxidation resistance. Nitrogen was added to improve creep[SCALE STEEL] properties and to make the steel complete austenite. Although the chromium and nickel content is relatively low, this stainless steel in many cases has the same high temperature characteristics as high-alloyed alloy steel and nickel-based alloys.
Application of 253MA Austenitic Stainless Steel:
253MA is widely used in sintering equipment, blast furnace equipment, steel melting, furnace and continuous casting equipment, [SCALE STEEL]rolling machine (heating furnace), heat treatment furnace and accessories, mineral equipment and cement production equipment. 253MA steel can be used to 900 ℃ pressure occasions and working temperature up to 1150 ℃ non-pressure high temperature parts.
Chemical Composition of 253MA Austenitic Stainless Steel:
S 0.030 or less
Cr 20.00-22.00[SCALE STEEL]
● Characteristics and Scope of Application:
CuZn20 common brass and [SCALE STEEL]CuZn20 similar properties, high strength, plastic is also good, high corrosion resistance, used as thin wall pipe, corrugated pipe paper mesh and building supplies.
● Chemical Composition:
Copper Cu: 79.0 ~ 81.0
Zinc Zn: margin
Lead Pb: ≤0.03
P: ≤0.01[SCALE STEEL]
Antimony Sb: ≤0.005
● Mechanical Properties:
Tensile Strength σb (MPa) : ≥265
Elongation δ10 (%) : ≥50[SCALE STEEL]
Note: tensile Mechanical properties of sheet metal
Sample size: Thickness ≥0.5 heat treatment
● Heat Treatment specification:
Hot working temperature 820 ~ 870℃; Annealing temperature 600 ~ 700℃; The low temperature annealing temperature to eliminate internal [SCALE STEEL]stress is 260℃.
An Alloy of Copper and Zinc is Named Brass:
Brass composed of copper and zinc is called plain brass.
If it is made up of more than two elements of multiple alloys is called special brass. Such as a copper alloy composed of lead, tin, manganese, nickel, iron, silicon. Brass has strong wear resistance. Special brass, also called special brass, has high strength, high hardness and strong chemical corrosion resistance. The mechanical properties of machining are also prominent. The seamless copper tube made of brass is soft and wear-resistant. Brass seamless pipe can be used in heat exchangers and condensers, cryogenic lines, submarine transport pipes. Manufacturing [SCALE STEEL]sheet, bar, bar, pipe, casting parts, etc. Copper in 62% ~ 68%, strong plasticity, manufacturing pressure equipment. Shanghai Qianfu Metal Materials Co., Ltd. is a production and sales of non-ferrous metal materials enterprises, main: phosphorus copper wire, phosphorus copper rod, phosphorus copper pipe, phosphorus copper [SCALE STEEL]flat wire; Red copper, brass. White copper, tin bronze, aluminum bronze, silicon bronze, beryllium bronze, lead material, the company has opened up the domestic and international markets, special specifications can be customized, timely delivery, quality assurance! In order to [SCALE STEEL]meet the special needs of our customers, our company has introduced and imported copper materials: More than 50 series of anaerobic copper, red copper, red copper, brass, lead brass, tin brass, iron brass, aluminum brass, manganese brass, silicon brass, nickel brass, tin bronze, tin phosphor bronze, aluminum bronze, beryllium bronze, chromium bronze, zirconium bronze, chromium zirconium bronze, iron bronze, nickel silicon bronze, cadmium bronze, magnesium bronze, silicon bronze, zinc white copper, iron white copper, aluminum white copper, manganese white copper, etc. A variety of specifications: copper strip, copper pipe, copper bar, copper sheet, copper plate, copper plate.
FROM SCALE STEEL