1100 is industrial pure aluminum, aluminum content (mass fraction) is 99.00%, can not be heat treatment hardening. With high corrosion resistance, electrical conductivity and thermal conductivity, its density is small, good plasticity, through[SCALE STEEL] pressure processing can produce a variety of aluminum, but low strength. Other process properties are basically the same as 1050A. 1100 is usually used for good forming performance, high corrosion resistance, does not need high strength, such as food and chemical handling and storage equipment, sheet metal products, hollow metal spinning processing with drawing goods, welding combination keys, reflectors, nameplates, etc.
1100 aluminum plate belt belongs to pure aluminum plate series, its strength is relatively low, has excellent ductility, formability, weldability and corrosion resistance; After anodic oxidation, the corrosion resistance can be further improved [SCALE STEEL]and the beautiful surface can be obtained. But cannot heat treatment strengthen.
Pure aluminum plate series according to the last two Arabic numbers to determine the minimum aluminum content of this series, such as 1100 series last two Arabic numbers for 00, according to the international brand naming principle, the aluminum content must reach more than 99.00% for qualified products. China's aluminum [SCALE STEEL]alloy technical standard (GB/T3880-2012) also clearly stipulates that 1100 aluminum content reaches 99.0%.
Applications of 1100 Aluminum:
1100 aluminum strip is generally used in utensils, radiators, bottle caps, printing plates, building materials, heat exchanger components, [SCALE STEEL]but also can be used as deep stamping products. It is widely used in various fields from cooking utensils to industrial equipment.
Al: 99.00 Si: 0.45 Cu: 0.05 ~ 0.20 Mg: -- Zinc Zn: 0.01
Manganese Mn: 0.035 Titanium Ti: -- Vanadium V: 0.05 Fe: 0.35
Note: Single :0.05.
Tensile strength σ B (MPa) : 110 ~ 136.
Elongation δ10 (%) : 3 ~ 5.
The Technical Standards:
National standard of aluminum plate and belt (GB/T 3880-2012), applicable to the unified standard of aluminum alloy plate [SCALE STEEL]and belt materials.
Alternative Names for 1100 Aluminum:
1100 (L6-1) -- International Standard: Al99.0(ISO); Japan: Al100/Al00 (JIS); European Standard: EN AW 1100 (EN) [SCALE STEEL]France: A45; Canada 990C (CSA); USA: 1100 (AA).