• Home
  • About
  • Contact
  • SCALE STEEL NEWS
SCALE STEEL.
  • Home
  • About
  • Contact
  • SCALE STEEL NEWS

HTCS-130 Hot Stamping Die Steel With High Thermal Conductivity- SCALE STEEL.

1/4/2021

 
​HTCS-130 is one kind of hot stamping die steel with high thermal conductivity introduced by Rovalma of Spain.

Hot Stamping Forming
The automobile high-strength steel plate is heated to the austenite temperature range, quickly moved to the mold to accept the rapid stamping, [SCALE STEEL]under the pressure holding state of the press, through the mold built-in cooling channel, rapid quenching cooling, and finally get the 1500MPa class ultra-high strength stamping parts.

Hot Stamping Die Steel
The complex working condition of hot stamping requires that the die material has high hardness, thermal conductivity, thermal strength, impact toughness, thermal stability and resistance to cold and hot fatigue.The thermal conductivity is the [SCALE STEEL]key physical property of hot stamping die steel and has a decisive influence on the production efficiency.
Usually the mold made of H13 steel with low thermal conductivity can only produce 2~3 stamping parts per minute, while the mold made [SCALE STEEL]of high thermal conductivity mold steel can produce 6~7 stamping parts per minute.

Chemical Composition for  HTCS-130(%):
C 0.31 Mo 3.1 W 1.95
Si 0.17 Cr 0.08 V 0.02
Mn 0.16 P 0.005 S 0.002

 Hardness for HTCS-130:
HTCS-130 shall be delivered in annealing state, hardness ≤250HB, service hardness range: 34~52HRC.

High Thermal Conductivity of HTCS-130
HTCS-130 has an extremely high thermal conductivity of 60W/(m·K) at room temperature, almost twice that of H13 steel.The advantage of [SCALE STEEL]high thermal conductivity is that it can take away heat quickly, which is conducive to the quick quenching of the workpiece. Meanwhile, the fast cooling speed is conducive to reducing the adhesion phenomenon caused by the contact between the mold and the workpiece.

Performance Purposes for HTCS-130
Htcs-130 is a kind of high performance hot steel, high thermal conductivity, high toughness, high thermal stability, good wear resistance, good [SCALE STEEL]mechanical performance, excellent polishing performance, often used in the manufacture of plastic injection molding, die casting or casting molding, as well as hot stamping forming molds that need high thermal conductivity.

Comments are closed.

    nEWS

    FROM SCALE STEEL
    [email protected]

    ARCHIVES

    April 2025
    December 2024
    October 2024
    September 2024
    July 2024
    June 2024
    May 2024
    April 2024
    March 2024
    February 2024
    January 2024
    December 2023
    November 2023
    September 2023
    August 2023
    July 2023
    June 2023
    April 2023
    March 2023
    February 2023
    January 2023
    December 2022
    November 2022
    September 2022
    July 2022
    May 2022
    March 2022
    February 2022
    January 2022
    December 2021
    November 2021
    October 2021
    September 2021
    August 2021
    July 2021
    June 2021
    April 2021
    March 2021
    February 2021
    January 2021
    December 2020
    November 2020

    Categories

    All

    RSS Feed

HENAN SCALE IMPORT& EXPORT CO.,LTD
[email protected] T:+8637186107816 F:+8637163797816

Copyright © 2018

  • Home
  • About
  • Contact
  • SCALE STEEL NEWS